Loen Can produce hexagonal honeycomb fillers with oblique and straight tube forms.
The materials are Mainly Three Kinds, namely polypropylene (PP) and PVC and SS304/316
The oblique tube is mainly used for all kinds of precipitation and sand removal, and is a water
treatment device with a wide range of surfaces and maturity in water supply and drainage
engineering for more than ten years. It has a wide range of applications, high treatment effect,
small footprint and other advantages, suitable for inlet sand removal, general industrial and
domestic water precipitation, sewage precipitation, oil separation and tailings concentrate treatment.
it can be adopted as for both new projects. And the transformation of existing old pools to achieve
good economic benefits.
Waste water clarifier tube settler plate settler lamella tube settler media
Tube settler, also called lamella clarifers,are used to remove solids or sand in the waste water
treatment. Tube settlers use multiple tubular channels slopped at an angle of f 55°- 60° degress
and adjacent to each other, which combine to form an increased effective settling area.This
provides for a paticle settling depth that is significantly less than the settling depth of a
conventional clarifer,reducing settling times.
Loren could support you with PP tube settler ot PVC tube settler media for cheaper choice,
Thickness and sheet size can be customized.
Tube settlers offer an inexpensive method of upgrading existing water treatment plant clarifiers and
sedimentation basins to improve performance.
They can also reduce the tankage/footprint required in new installations or improve the performance
of existing settling basins by reducing the solids loading on downstream filters.Made of lightweight PVC,
tube settlers can be easily supported with minimal structures that often incorporate the effluent trough
supports.
They are available in a variety of module sizes and tube lengths to fit any tank geometry, with custom
design and engineering offered by the manufacturer.
The advantages of tube settlers can be applied to new or existing clarifiers/basins of any size:
* Clarifiers/basins equipped with tube settlers can operate at 2 to 4 times the normal rate of
clarifiers/basins without tube settlers.
* It is possible to cut coagulant dosage by up to half while maintaining a lower influent turbidity
to the treatment plant filters.
* Less filter backwashing equates to significant operating cost savings for both water and electricity.
* New installations using tube settlers can be designed smaller because of increased flow capability.
* Flow of existing water treatment plants can be increased through the addition of tube settlers.
* Tube settlers increase allowable flow capacity by expanding settling capacity and increasing the
solids removal rate in settling tanks.
Sheet size and thickness can be customized.
| Item | Tube settler media | ||||||||
|
Material |
PP |
PVC |
FRP |
||||||
|
Diameter( mm) |
φ35 |
φ50 |
φ80 |
φ35 |
φ50 |
φ80 |
φ35 |
φ50 |
φ80 |
|
Sheet quantity /m2 |
40 |
32 |
20 |
40 |
32 |
20 |
40 |
32 |
20 |
|
Thickness (mm) |
0.5 |
0.45 |
0.7 |
0.5 |
0.45 |
0.7 |
0.5 |
0.5 |
0.7 |
|
Weight (kg/m2) |
21 |
16 |
16 |
31 |
23 |
23 |
41 |
31 |
31 |
|
One sheet size(mm) |
1000×1000×δ |
1000×1000×δ |
1000×1000×δ |
||||||
|
One block size(mm) |
1000×1000×866 |
1000×1000×866 |
1000×1000×866 |
||||||
|
Application |
Water supply, sewage water |
sewage water |
Water supply, sewage water |
||||||
|
Color |
White |
Blue |
Can be customized |
||||||
|
Assemble method |
Electrical heating |
Glue |
Glue |
||||||
|
installation angle |
60° |
60° |
60° |
||||||
|
temperature |
5~50℃ |
5~50℃ |
5~70℃ |
||||||
|
Proportion g/cm3 |
0.92 |
1.35~1.46 |
1.8 |
||||||
|
Product feature |
Flexible, easy to float
|
easy to degrade friable |
acid and alkali resistant |
||||||
|
Transportation mode |
By loose sheets |
By loose sheets |
By loose sheets |
||||||
Comment:
